Winterize An Outboard Boat Motor. The engine will run for 90. You do not need to take the spark plugs out of the engine !
3 Ways To Winterize A Boat - Wikihow from www.wikihow.com
This will help get rid of any sediment collecting within the system. Change engine oil and oil filter. One ounce of stabilizer will be able to.
Spray The Oil For A Couple Of Seconds Into Each Spark Plug Hole.
Another important factor when winterizing your outboard motor is to flush it with water. Run your outboard for a few minutes so the engine draws. You do not need to take the spark plugs out of the engine !
You May Also Be Wondering The Steps To Winterize Your Outboard Motor.
Flush the engine with fresh water. Turn on the water and. A cold crappy day means nobody is at the.
Winterizing Outboard Motor With Boat In The Water, Then On The Trailer For Winter Storage.
To protect the mixture from turning bad throughout the winter, use the marine gas stabilizer. If you want your engine to start in the spring and last you many years and plan on not using your engine all winter, you do have to winterize an. Grease the fittings and tuck it away grease all the fittings on the motor.
Remove The Spark Plugs, And Spray The Fogging Oil Directly Into The Engine's Combustion Chambers.
The engine will run for 90. Consult your owner’s manual for the recommended viscosity and capacity. Change engine oil and oil filter.
Using An Outboard Flusher (Or Earmuffs, As Some Call Them), Put Them Over The Raw Water Intake Of The Engine And Connect A Hose.
Follow the recommendations on the fuel stabilizer's. The engine will double oil itself b. This will help get rid of any sediment collecting within the system.
