How To Shrinkwrap A Boat For Winter. Once you have taken steps to winterize your boat you need to: Simply pierce the wrap at the stern of the cockpit with a marlin spike, then cut from rear to front with a rigger’s knife.
Boat Shrink Wrapping Tips | Skisafe from www.skisafe.com
The shrink wrap is very strong. You might need a ladder for this one. The material eliminates pooling of water and sheds snow to reduce the risk.
In This Video, We're Taking A Look At The Tools And Supplies Needed To Shrink Wrap A Boat.
Boat shrink wrap is completely resistant to moisture so your boat stays dry through rain, sleet, or snow. Shrink wrap is an option to keep your boat dry if you do not have access to a garage. Find the sheet’s midline and drape it over the center of your pontoon boat lengthwise.
The First Two Methods Of Winter Boat Storage We Are Going To Explore Are Shrink Wrapping And Using A Tarp.
When lifting from the water, make. Once you have taken steps to winterize your boat you need to: Place tape over the fuel vents.
To Accomplish The Heat Shrinking Process Of Your Boat Or Other Product, You Will Need To Use A Propane Fired Heat Gun.
Before adding the shrink wrap, measure out how wide your wrap should be. On the other hand, if you keep the mast down, you won’t be able to access the sailboat. Simply pierce the wrap at the stern of the cockpit with a marlin spike, then cut from rear to front with a rigger’s knife.
A Cord Or Tape Is Used.
Start from the highest point on the boat, the support post. Snow falling on it is not that big a deal. One of the biggest dangers of the winter months is snowfall.
If You Don’t Know Where These Are Located, You Should Refer To Your Boat’s Manual Or Contact The.
Then unfurl the edges of the shrink wrap so that it. The shrink wrap is very strong. By wrapping the boat with the mast up, you can decide how much deck room you’ll have.
